This display window shows that for Monday’s heating/cooling period 1, the start time is 5:00 AM, and 64° is the programmed tem- perature (this example reflects factory pre- programming, where 64° is the HEAT A temperature).
3.To change the displayed start time to your selected start time for Monday’s period 1,
press TIMEFWD or BACKTIME until your selected time is displayed. The time will change in 15 minute increments. The time you program will be the start time of Monday’s period 1 for both heating and cooling.
4.If the temperature displayed is not the HEAT A or HEAT B temperature you want for
Monday’s period 1, press or (if
you continue to press or , the
display will alternate between the HEAT A and HEAT B temperatures you previously selected).
5.If you want the fan to run continuously during Monday heating/cooling period 1,
press until PRG FAN is displayed.
6.After selecting the desired heating tempera- ture for heating/cooling Monday’s period 1,
press PRGMVIEW . The currently programmed start
time and heating temperature for Monday’s heating/cooling period 2 will be displayed.
7.Repeat steps 3 through 5 to select the start time and heating temperature for Monday’s heating/cooling period 2.
8.Repeat steps 3 through 7 for Monday’s heating/cooling periods 3 and 4.
27