14
5. Remote Control Unit Installation Position
The remote control unit can be operated from either a
non-fixed position or a wall-mounted position.
To ensure that the air conditioner operates correctly, do
not install the remote control unit in the following places:
GIn direct sunlight
GBehind a curtain or other place where it is covered
GMore than 26' (8 m) away from the air conditioner
GIn the path of the air conditioner’s airstream
GWhere it may become extremely hot or cold
GWhere it may be subject to electrical or magnetic
interference
GWhere there is an obstacle between the remote con-
trol unit and the air conditioner (since a check signal
is sent from the remote control unit every 5 minutes)
5-1. Mounting on a Wall
Before mounting the remote control unit, press the
ON/OFF operation button at the mounting location to
make sure that the air conditioner operates from that
location.The indoor unit should make a beeping sound
to indicate that it has received the signal.
Fig.36
To take out the remote control unit,pull it forward.
Press
Set in
place
Remote control
unit mount
Mounting screws
Rear side
Hole
To prevent loss of the remote control
unit, you can connect the remote
control unit to the mount by passing
a string through the remote control
unit and attachment hole.
5/32 5/8" (4 16 mm)
(included)
09-073 CM3172_IU 7/3/09 5:48 PM Page 14