Warning

If refrigerant gas blows off during the work, do not touch the refrigerant gas as it may cause frostbite.

 

 

Prohibit

If refrigerant gas leaks during the work, ventilate the room.

 

If refrigerant gas catches fire, harmful gas may be generated.

 

 

 

Do not mix any gas other than the specified refrigerant gas in the refrigerating cycle.

 

If air or other contaminants mix with the gas, pressure will become extremely high in the refrigerating cycle,

 

which may cause a unit breakdown."

Prohibit

When the welded section of the compressor intake or discharge pipe is to be disconnected, perform it in

 

a well-ventilated place after sufficiently recovering the refrigerant gas.

 

Any residue gas may jet out refrigerant or refrigerating machine oil, which may cause an injury.

 

When the work is to be performed in a high place (About 2 meters or more), make sure to wear a safety helmet,

 

gloves and safety belt. Insufficient safety gear may cause a serious injury in case of a fall.

 

 

 

When the unit is to be relocated, confirm that the new installation location has sufficient strength for the weight of the unit.

 

Insufficient strength of the installation location and incomplete installation work may cause an injury due to

 

the unit falling.

 

When the remote controller batteries are replaced, dispose of the old batteries out of the reach of children.

 

If a child swallows a battery, make sure that the child gets immediate medical attention.

 

 

 

Caution

Do not wash the air conditioner with water, as this may cause an electric shock or fire.

 

 

Prohibit

For the repair work in places with high humidity or moisture, make sure to ground the unit.

 

Failure to do so may cause an electric shock.

 

 

 

Confirm that the component attachment position, wiring condition, soldering condition and connector connection

 

are normal.

 

If not, it may cause overheating or fire.

 

Confirm that the temperature around the compressor is not too high, and then perform the repair work.

 

Failure to do so may cause a burn.

 

 

 

Perform welding work in a place with good ventilation.

 

If the work is performed in a poorly ventilated area, it might cause a lack of oxygen.

 

 

 

If the installation plate or attachment frame has deteriorated due to corrosion, etc., replace it.

 

Failure to do so may cause an injury due to the unit falling.

 

 

 

When the cleaning is to be performed, make sure to turn off the power and pull out the plug.

 

Touching the fan that is rotating at high speed may result in an injury.

 

 

 

When the indoor unit is to be removed, do not place it on an incline.

 

Doing so may cause wet furniture because water left inside may trickle down.

Prohibit

 

Do not hold the sharp end of the unit or the aluminum fins, as it may cause an injury to your hand or finger.

Prohibit

 

After repairs, make sure to measure the insulation resistance and confirm that the value is 1 Mohm or more.

 

Any insulation error may cause an electric shock.

 

 

 

After repairs, make sure to check the drainage of the indoor unit.

 

Inappropriate drainage may cause wet furniture and floors due to water leakage.

 

 

 

3

Page 2 Page 4
Page 3
Image 3
Sanyo XMS1272, XMS0972 service manual Prohibit
Page 2 Page 4

XMS1272, XMS0972 specifications

The Sanyo XMS0972 and XMS1272 are remarkable air conditioning units that blend efficiency with cutting-edge technology. Designed for residential and commercial spaces, these models promise comfort while optimizing energy consumption.

One of the standout features of both the XMS0972 and XMS1272 is their advanced inverter technology. This feature allows the units to adjust their cooling capacity based on the room's ambient temperature. As a result, the air conditioners can maintain a consistent temperature without the frequent on/off cycles associated with traditional units. This not only ensures a more stable climate but also significantly reduces energy consumption, making them eco-friendly options.

Another significant characteristic is the Quiet Operation mode. Both models are engineered with noise reduction technology, providing a tranquil environment for users. This is particularly beneficial for bedrooms, offices, or libraries where noise levels can be a concern. The XMS models operate at a whisper-quiet level, allowing users to focus on their tasks or enjoy a peaceful night's sleep without disruption.

The Sanyo XMS0972 and XMS1272 also feature a user-friendly digital interface. With an intuitive remote control and an easy-to-read display, setting your desired temperature or switching modes has never been easier. Moreover, the smart diagnostic capability allows for quick troubleshooting, helping to identify any issues to ensure peak performance throughout their lifespan.

Both models are equipped with a 24-hour timer, adding convenience for users who wish to come home to a pre-cooled or heated environment. This feature enhances comfort and saves energy when the unit is not in use.

In terms of design, the Sanyo XMS units boast a sleek and modern aesthetic that seamlessly integrates into various interior styles. Their compact size allows for flexible installation options, making them suitable for various living and working spaces.

The XMS line also emphasizes air purification, incorporating advanced filters that capture dust, allergens, and other pollutants. This results in not just temperature control but also improved air quality, contributing to a healthier living environment.

In conclusion, the Sanyo XMS0972 and XMS1272 air conditioning units stand out for their energy efficiency, quiet operation, user-friendly features, and air purification capabilities. These characteristics make them an ideal choice for individuals and businesses looking for reliable and sophisticated climate control solutions.
Top Page Image Contents