thermostat to subbase. Then press
programming instructions to correct the er- | Press | |
ror (you can change any part of your pro- | ||
| ||
gram while you are reviewing it). |
|
SYSTEM | until OFF is displayed. Reattach |
HEAT - OFF - COOL - AUTO |
SYSTEM to
HEAT - OFF - COOL - AUTO
6.Press PRGMRUN .
7. Press | SYSTEM | until COOL is displayed. |
HEAT - OFF - COOL - AUTO |
8.Repeat steps 2 through 5 to check cooling temperatures.
9.Press PRGMRUN to begin program operation.
YOUR THERMOSTAT IS NOW COMPLETELY PROGRAMMED AND READY TO AUTOMATI- CALLY PROVIDE MAXIMUM COMFORT AND EFFICIENCY!
select the operation mode you want (HEAT, COOL, AUTO).
NOTE
When you have completed programming, you may set option switches #3 or #4. (see TOTAL KEYPAD LOCKOUT and PARTIAL KEYPAD LOCKOUT in the OPERATING FEATURES section).
32