Whynter ARC-10WB instruction manual The unit is set to low fan, P a g e

Models: ARC-10WB

1 22
Download 22 pages 30.8 Kb
Page 21
Image 21
The unit is set to low fan

 

The unit is set to low fan

Set the unit to a higher fan speed.

 

speed.

 

The unit has worked for

Windows or doors are open.

Close all windows and doors.

 

 

a long time, but the

There are too many people in

You may need additional cooling or another

room is not cold

the room.

air conditioner.

enough

 

 

 

There is direct sunshine into

Close curtains or blinds and try to minimize

 

the room.

the amount of direct sunlight into the room.

 

 

You may need additional cooling or another

 

The room is a kitchen or with

air conditioner.

 

many heat-producing

 

 

appliances

 

 

 

You may need additional cooling or another

 

There is a server in the room.

air conditioner.

 

The room is too large.

You may need additional cooling or another

 

 

air conditioner.

The unit is very noisy

The unit is not level.

Make sure the unit is on hard, level and

 

stable surface.

 

 

 

The surface underneath the

Move the unit to a location with a level and

 

unit is uneven.

hard floor.

 

 

Make sure the wall outlet and support the

 

Low power voltage.

required power consumption of the air

 

 

conditioner and do not use an extension cord.

The unit leaks water

The unit is tilted or not leveled

Make use the unit is leveled.

 

 

 

The water tank is full.

Drain water from the drain plug at the back of

 

 

the air conditioner.

Fan speed cannot be

Fan speed differences are not

The fan speed difference is not very

very noticeable

noticeable when the compressor is on. Try

changed

 

setting the unit to Fan only mode, you should

 

 

 

 

be able to hear the difference between high

 

 

and low fan speed settings.

21 P a g e

Page 21
Image 21
Whynter ARC-10WB instruction manual The unit is set to low fan, P a g e