Window kit Installation in a double-hung window
1.Open window or sliding door for approximately
5”
2.Cut the foam seal (adhesive type) to the proper length and attach it to the bottom of the window. Fig.10.
3.Adjust the length of the window bars to the same length and width of the opening of the window. Cut the window piece if necessary to fit the length of your window. Fig. 11.
4.Close the window on the window slide bars. For long term installation, you may screw the window kit into your window frame. Fig. 12.
5.Cut the foam seal to the length and seal the open gap between the top window sash and outer window sash. Shown in Fig.13.
11 P a g e
