W i e b e T e c h L L C
Chapter 5 Advanced operations
5.1 Create volume group
To create the volume group, please follow these procedures:
Figure 5.1.1
1.Enter Volume config.
2.Enter Volume group.
3.Click 
.
4.Enter a VG Name, choose a RAID level from the pull down menu,
press 
to choose the PD slot(s) that will be members of this
VG, then press 
.
5.Check the setting. Press 
if all settings are correct.
6.Done. A summary page will be created to show the new VG.
Figure 5.1.2
(Figure 5.1.2: Setup of RAID 0 with 2 physical disks, named “VG-R0”. The total size is
306GB. Because no related UDV has been created yet, free size is still 306GB.
VG status is online.)
ProSATA SS8 User Manual | - 30 - |
|
|
