W i e b e T e c h L L C
3.4 LCM (LCD Control Module)
The LCM is found on the bottom side of the ProSATA. It has four buttons for controlling functions: c(up), d(down), ENT (Enter), and ESC (Escape).
cand d are pressed to scroll through the functions and options. ENT is pressed to enter functions and to accept selections.
ESC is used to exit to previous menu. Holding ESC will jump back to main menu.
After the system boots up, the following screen will be shown on the LCM:
WiebeTech |
|
(IP address) | ↵ |
There are 6 functions accessible by the LCM: Alarm Mute, Reset/Shutdown,
Quick Install, View IP Setting, Change IP Config, and Reset to Default.
Alarm Mute | Select Alarm Mute to mute the alarm. | |
|
| Select Reset to restart the controller without powering |
|
| |
Reset/Shutdown | ||
|
| down. |
|
| Select Shutdown to prepare controller for shutdown prior |
|
| to powering off. |
|
| Before powering off system, it is recommended to do |
|
| Shutdown from the controller to clear the data from |
|
| cache. |
|
| Select Quick Install to setup a RAID array from the |
Quick Install | ||
|
| available drives. Please see Appendix for RAID level |
|
| definitions and minimum requirements for each RAID |
|
| level. |
|
| Select View IP Setting to display current IP address, IP |
View IP Setting | ||
|
| subnet mask, and IP Gateway. |
|
| Select Change IP Config to modify IP address, IP subnet |
Change IP Config | ||
|
| mask, and IP Gateway. |
|
| Select Reset to Default to reset to original manufacture |
Reset to Default | ||
|
| settings. The login and password will return to default: |
|
| admin:1234, and the IP address to default: 192.168.0.1 |
ProSATA SS8 User Manual | - 11 - |
|
|
