WiLife V2.1 manual Review the Recording Dialog, Manage Motion Detection Zones

Setting System Options User Guide

Each time the camera detects motion it alerts the Command Center software and records the event and a few prior frames. Once motion is detected, the system records uninterrupted until 5-seconds after the motions stops. This could create seconds or minutes of compressed video.

Review the Recording Dialog

From the main Command Center screen click the SETUP button and choose the Recording tab to modify your recording and disk usage settings:

Dialog

Item	Usage
Camera	Click the camera button 1-6 to select the camera
Buttons	you wish to adjust.
Detection	Slide the bubble toward the [–] to reduce or
Sensitivity	toward the [+] to increase the motion sensitivity
	for the selected camera.
Display of	Check to see zones on the live view of each
Zones	camera during motion detection.
Clear All	Click button to delete all motion detection zones
Zones	for the selected camera.
Clear	After clicking within one of the detection zone,
Selected	click this button to delete the chosen zone. You
Zone	can also simply press the Delete key.
Enable	Click to set the entire image as one complete
Entire	zone. (Default)
Image
Schedule	Click button to open the Recording & Alerts
Recording	Schedule Screen to schedule recording times,
Time	armed alerts, or times cameras are to be
	disabled.
View Disk	Click button to review current disk usage or to
Usage	change the video storage location.

Manage Motion Detection Zones

SETUP > Recording

When you have the Setup > Recording dialog open, Command Center enters a special mode that allows you to select and draw motion zones directly on the Live Video image. You must be in Live Mode to access the full functionality when working with motion zones.

To manage detection zones for a camera, follow these instructions: 1) Click on the Setup button and choose the Recording tab.

Creating and deleting individual zones now is an interaction between the open setup dialog and the live video window.

a) To create a new zone, hold down your left-mouse button on one corner of the region and drag the mouse across the screen to the opposite corner of the zone. (If you decide that you do not like the zone you are creating, you can hit the ESC key before you let go of the mouse.)

51