Williams Sound CFM 400, CFM 300 user manual SS-3 Floor Stand KIT

Tension Screw

Head

FIG. 14: BRACKET 012 WALL MOUNTING

Jam Nut

Front of R800

If rotational adjustment is required, use a 7/16" open-end wrench to loosen the jam nut on the ballshaft. Rotate the receiver/ speaker and re-tighten the jam nut.

INSTALLING THE SS-3 FLOOR STAND KIT

1.Align the three holes in the MFL 002 flange with the three pre-drilled holes in the base of the R800 or SPK 800. (See Figure 15.)

FIG. 15: FLANGE PLACEMENT

Front Of

R800/SPK 800

Flange

Placement

FIG. 16: SS-3 FLOOR STAND KIT

R800/SPK 800

Flange

Bottom of R800/SPK 800

Floor Stand

2.Secure the MFL 002 flange to the receiver or speaker using the three screws provided.

3.Set the resulting flange/speaker assembly on the threaded top of the STD 003 Floor Stand and turn until secure. DO NOT OVER TIGHTEN. (See Figure 16.)

18	Williams Sound ®
	Helping People Hear