Windsor ADM8 10080170 manual Adjust handle to comfortable operating

OPERATIONS

Adjust handle to comfortable operating	STEP
position. Tip machine back by main handle	5
to move to starting point.

Lower machine to floor.	STEP
	6

Select continuous setting to start solution	STEP
spray or select intermittent setting to	7
enable use of trigger switches to start
solution spray.
The intermittent setting requires the
operator to hold any one of the three
trigger switches in the “on” position with the
fingers, and is typically used in small areas
where short cleaning passes are made.
The continuous setting allows the operator
to set the switch in the “on” position with
one touch, and is typically used in large
areas where long cleaning passes are
made.

INT

CONT

3-7 ADMIRAL 86038230