1ft.

(30cm)

OFF

STEP

1

STEP

2

CLEANING PROCEDURE

Start at wall closest to power outlet. Pull straight back without pushing down on handle.

Release intermittent trigger switches or turn off continuous setting on solution switch approximately 1 foot before ending cleaning pass.

1in.

(25mm)

STEP

3

Push down on handle to raise vacuum shoe and brush before moving to the next cleaning pass. Overlap brush contact area approximately 1inch.

SOLUTION

INTAKE COVER

VACUUM

INTAKE COVER

STEP

4

During operation, observe the following: The Admiral is equipped with clear internal covers to facilitate operator viewing of dirty solution and vacuum air flow.

During operation, observe the vacuum intake cover. Large amounts of water or foam entering the vacuum system can damage the vacuum motor. If you notice either condition, shut down the machine immediately. Empty recovery tank and/or add defoamer to recovery tank.

ADMIRAL 86038230

3-8

Page 17
Image 17
Windsor ADM8 10080170 manual Cleaning Procedure, Off, Solution Intake Cover Vacuum Step