Windsor Saber Blade 12 Technical specifications, Spare parts, Clean water distributor, Power

Clean water distributor

ÎTake out the brush.

ÎPull the water distribution bar out of the brush tunnel (Fig. 5, see inside front cover).

ÎClean the irrigation channel and the opening in the water distribution bar under running water.

Clean suction tube

ÎRemove the solution tank from the appliance.

ÎSwivel support bow downward and remove the recovery tank.

ÎPull the suction tube connection out toward the rear of the appliance and swivel out both ends of the suction tube (Fig. 6, see inside front cover). The suction tube is separated and both ends are accessible for clean- ing.

ÎPull the squeegee off toward the bot- tom, the suction channel in the cleaning head is accessible for cleaning (Fig. 7, see inside front cov- er).

ÎFlush the suction hose and the suc- tion channel with water or pull or push the obstruction out with a blunt object.

Technical specifications

Power
Nominal voltage	V/Hz	120 /
		1~60
Average power con-	W	600
sumption
Vacuuming
Cleaning power, air	gpm	380
quantity	(l/s)	(24)

12English

Cleaning power, neg-	psi	2.0
ative pressure	(kPa)	(14)
Cleaning brush
Working width	in	12
	(mm)	(300)
Brush diameter	in	2.4
	(mm)	(60)
Brush speed	1/min	1550
Dimensions and
weights
Theoretical surface	ft²/h	2152
cleaning performance	(m²/	(200)
	h)
Fresh/dirty water res-	gal (l)	1 (4)
ervoir volume
Length	in	15.4
	(mm)	(390)
Width	in	13.2
	(mm)	(335)
Height	in	46.5
	(mm)	(1180)
Weight (without tank	lb	24.3
contents)	(kg)	(11)
Noise emission
Sound pressure level	dB(A	71
(EN 60704-1)	)
Machine vibrations
Vibration total value	m/s²	0,5
(ISO 5349)

Spare parts

–Only use accessories and spare parts which have been approved by the manufacturer. The exclusive use of original accessories and original spare parts ensures that the appli- ance can be operated safely and troublefree.

–At the end of the operating instruc- tions you will find a selected list of spare parts that are often required.