CONTROLS - TRACTION
1.SOLUTION CONTROL KNOB Controls solution flow to scrub deck.
To increase flow, rotate knob clockwise.
To decrease flow, rotate knob counterclockwise.
If the brush motor is turned off or the direction control lever is in neutral, the flow is automatically interrupted until the motor is turned on again. This feature prevents unintentional draining of the solution tank and allows the operator to adjust the solution flow to the scrub deck without resetting each time the scrubbing operation is interrupted.
2.BRUSH SWITCH
Controls the scrub brush motor.
To turn scrub brush on, press the top of the switch. The brush will not rotate with the direction control lever in neutral.
To turn the scrub brush off, press the bottom of the switch.
3.BRUSH LIFT LEVER Raises and lowers the brush.
To lower the brush, lift the lever from the notch, move to the left, then lower.
To increase brush pressure, lock the lever into the lowered position.
To raise the brush, lift the lever from its lowered position and lock into highest notch.
4.VACUUM SWITCH Controls the vacuum motor.
To start vacuum motor, press the top of the switch.
To stop vacuum motor, press the bottom of the switch.
5.SQUEEGEE LIFT LEVER Raises and lowers the squeegee.
To lower the squeegee, lift and pull the lever to the left and then lower.
To raise the squeegee, lift the lever and push it to the right.
6.KEY SWITCH
Controls the power for machine functions. To turn machine on, rotate key clockwise.
To turn machine off, rotate key counterclockwise.
FOR SAFETY: Always remove the key when machine is unattended or during service to prevent unauthorized movement.
7.PROPEL BUTTONS (NORMALLY FORWARD)
Controls the machine direction, scrub brush and solution flow.
To propel machine forward, push the button on either of the control handles.
The scrub brush will not rotate and the solution will not flow to the scrub deck unless a propel button is pushed.
8.REVERSE PROPEL BUTTON Controls the machine direction in reverse.
To propel machine backward, push the button on the control panel and one of the buttons on either of the control handles.
SABER (SC) 86038350 01/29/07 |
