MACHINE TROUBLESHOOTING
PROBLEM | CAUSE | SOLUTION |
|
Little or no solution flow to the | Solution tank empty | Fill solution tank |
|
floor |
|
|
|
| Solution flow turned off or | Turn on or increase flow |
|
| set too low | setting |
|
| Solution strainer plugged | Clean solution strainer |
|
|
|
|
|
| Solution hoses obstructed | Clear obstruction from |
|
|
| hose |
|
| Solution solenoid valve | Clean or replace |
|
| obstructed or stuck |
|
|
| (traction model only) |
|
|
No power to machine | Battery disconnected | Check all battery cable |
|
|
| connections |
|
| Emergency | Reset |
|
| activated (traction model |
|
|
| only) |
|
|
| Battery connections | Clean connections |
|
| corroded |
|
|
| Faulty main contactor | Replace contactor |
|
|
|
|
|
| Faulty power switch | Replace switch |
|
Little or no propel (traction model | Low battery charge | Charge batteries |
|
only) | Machine turned on with | Allow control button to |
|
| directional control button(s) | return to neutral. Restart |
|
| not in neutral |
|
|
| Controller overheated | Allow cool down period |
|
| Loose connection | Check motor wires and |
|
|
| connection |
|
SABER (SC) 86038350 01/29/07 |
|
