TECHNICAL SPECIFICATIONS
ITEM | DIMENSION/CAPACITY |
Nominal power – | 1100 W |
Nominal power – traction model | 1200 W |
Rated Voltage | 24VDC |
Rated Amperage – | 45 Amps |
Rated Amperage – traction model | 50 Amps |
Batteries | 2 x 12 Volt |
| 20hr rate |
Scrub Brush Motor | .75 hp (0.56 kW) |
Vacuum Motor | .75 hp (0.56 Kw) |
Propelling Motor – traction model | .38 hp (0.28 Kw) |
Mass (GVW) – | 543 lbs. (246.5 kg) |
Mass (GVW) – traction model | 556 lbs. (252.4 kg) |
Weight empty without batteries – | 213 lbs. (96.1 kg) |
Weight empty without batteries – traction model | 232 lbs. (105.3 kg) |
Solution Control – | Gravity feed, fully variable |
Solution Control – traction model | Gravity feed, fully variable with |
| automatic |
Solution tank capacity | 13 gal. (50 l) |
Recovery tank capacity | 16 gal. (60 l) |
Scrub brush diameter | 20 in (51 cm) |
Scrub brush pressure – | 50 lbs. (23 kg) |
Scrub brush pressure – traction model | 100 lbs. (45 kg) |
Scrub brush speed | 200 rpm |
Tires – | 2 x 8 in (20 cm) thermoplastic |
| elastomer |
Tires – traction model | 2 x 8 in (20 cm) foam filled non- |
| marking |
Casters | 3.5 x 1.25 in (9 cm) polyurethane |
| solid |
Foundation Pressure – | 105 lbs./in 2 ( 725 kPa) |
Foundation Pressure – traction model | 46 lbs./in 2 ( 315 kPa) |
Maximum Speed – traction model | 2.75 miles/hour (4.5 km/hour) |
Coverage | 9500 ft2/hour at 2 mph with |
| 2 in. overlap |
Frame Construction | Steel with epoxy powdercoat |
| finish. |
Minimum aisle | 45 in. ( 114.3 cm) |
Maximum rated climb and descent angle with empty tanks | 2% |
Maximum rated climb and descent angle with full tanks | 2% |
SABER (SC) 86038350 01/29/07 | |
|