9.SPEED CONTROL KNOB Controls the speed of the machine.
To increase speed, rotate knob clockwise.
To decrease speed, rotate knob counterclockwise.
10.BATTERY CHARGE LEVEL INDICATOR Indicates the charge level of the batteries.
The meter display is divided into 10 vertical bars. Bars illuminated on the far right indicate full charge. Bars flashing near the left side indicate the batteries should be recharged. Further operation of the machine could damage the machine or the batteries.
When the machine is left overnight with less than a full charge, the display may initially indicate a full charge. It will also indicate a full charge if the batteries are disconnected, then reconnected. After a few minutes of operation the meter will give the correct charge level.
11.EMERGENCY SHUT-OFF SWITCH (OPTIONAL)
Shuts off machine.
To shut off machine, push the switch.
To restart machine, rotate the switch clockwise.
CONTROLS - TRACTION
12.HOUR METER (OPTIONAL)
Records the number of hours the machine’s brush has been in operation. This information is useful in determining when to service the machine.
13.CIRCUIT BREAKERS
Circuit breakers interrupt the flow of power in he event of an electrical overload. When a circuit breaker is tripped, reset it by pressing the exposed button. If a circuit breaker continues to trip, the cause of the electrical overload should be found and corrected.
3 Amp. Protects the machine controls.
30 Amp. Protects the scrub brush motor.
30 Amp. Protects the vacuum motor.
25 Amp. Protects the propel motor.
SABER (SC) 86038350 01/29/07 |
