MAINTENANCE
3. SIDE SQUEEGEE ADJUSTMENT
TO REPLACE OR ROTATE SIDE SQUEEGEE BLADES
1.Loosen the locking knob and pivot the side squeegee out as if to expose the brush.
2.Loosen and remove the three nuts and bolts securing squeegee blades.
3.Remove the retaining strap and squeegee blade and rotate or replace squeegee blade.
4.Install blade and retaining strap on locating pin and reinstall three bolts and nuts.
5.Tighten nuts. Do not over tighten nuts as this will damage the retaining strap and deform the squeegee blade.
6.Pivot the side squeegee back into place and tighten the locking knob.
ADJUSTING THE SIDE SQUEEGEE
DEFLECTION
Side squeegee should deflect approximately 3/8 in. when in use. If the blade is under curled it will skip low spots and leave puddles. It the blade is over curled or worn it will smear water and leave stripes and streaks.
1.Choose a smooth level surface. Lower the scrub deck to the floor and drive forward slowly while observing the curl and squeegee performance.
2.To increase the curl, turn the deflection adjustment knob counter clockwise.
3.To decrease the curl, turn the deflection adjustment knob clockwise.
SGJ32 86037680 01/03/07 | |
|
