TO REMOVE BATTERIES
1.Stop the machine in a clean area next to the charger.
2.Turn off machine and set parking brake.
FOR SAFETY: Before leaving or servicing machine, stop on level surface, apply parking brake, turn off machine and remove key.
3.Raise the seat plate.
4.Remove side cover.
5.Disconnect battery pack from the machine.
6.Use the proper size open end wrench to disconnect main ground wire first and secure cable terminal away from batteries.
7.Disconnect main positive lead and secure cable terminal away from battery/batteries.
8.Loosen both terminals on each jumper cable and remove one at a time.
9.Prepare a suitable battery site to place batteries.
10.Attach suitable battery lifting device and lift batteries from the machine.
!
Batteries are a potential environmental hazard. Consult your battery supplier for safe disposal methods.
MAINTENANCE
TO REPLACE BATTERIES
1.Refer to diagram. Place batteries in battery compartment.
2.Connect all jumper cables positive to negative to the six batteries.
3.Connect the positive cable to battery in the position shown.
4.Connect negative cable to battery in the position shown.
CHARGER CONNECTION |
SGJ32 86037680 01/03/07 | |
|
