Windsor Zephyr manual Unpacking the unit, Attaching the accessories, Filling the boiler with water

1. Starting the unit

1Steam pistol

2Handwheel for steam control

3Release button

4Locking mechanism (child lock)

5Steam switch

6Modular accessory plug

7Reset button – Descaling completed

8VAPOHYDRO control knob

9Temperature indicator

10Steam control knob

11Indicator light – Descaling due (white)

12Indicator lamp –

Low water warning, additional tank (red)

13Indicator lamp – Heater (yellow)

14Heater ON/OFF switch

15Steam supply switch

16Indicator lamp –

Low water warning, boiler (red)

17Boiler cap with safety valve

18Tank cap

19Funnel for filling tank

20Extension tubes

21Spot nozzle

22Circular brush

23Extension

24Power nozzle (red)

25Hand nozzle

26Terry-toweling slip-on

27Window nozzle*

28Floor nozzle

29Large wiping cloth

30Household iron *

31Temperature control

32Steam-ironing switch

33Indicator lamp – heater for household iron

34Retaining bracket

35Floor Nozzle Storage Fitment

* Optional accessory

1.1 Unpacking the unit

•If you notice any transport damage while unpacking the unit, please report it to your dealer immediately.

•The packaging materials should not simply be disposed of as domestic refuse. Instead, the left- over packaging components should be taken to an official collection point for recycling.

1.2 Attaching the accessories

•Connect the modular accessory plug to the main unit. The lugs on the plug must lock into place on the cover of the main unit socket.

•Attach the required accessory (floor, hand or spot nozzle) to the steam gun. Push both parts together until the lock button on the steam gun snaps into place.

•If required, use the extension tubes. Assemble the tube sections by pushing one into the other until the button snaps into place.

•Press the release button to separate the acces- sories from each other.

1.3 Filling the boiler with water

•Remove the safety cap from the main unit.

•Using the funnel, pour a maximum of 0.5 gal (2 litres) of tap water into the boiler. Hot water shortens the heating-up time.

Note: With the unit standing on a level surface, the boiler can be filled up to 0.75 in (2 cm) below the top of the filler neck.

•Do not use any detergents.

•Refit the safety cap onto the main unit, and ensure that it is properly tightened.

Additional tank

Fill the additional tank in order to prolong the time that the cleaner can be used before it requires refilling.

•Unscrew the cap on the additional tank.

•Using the funnel, pour a maximum of 0.5 gal (2 litres) of tap water into the tank.

•Screw the cap back onto the tank.

4English