Windsor Zephyr manual Temperature indicator, Steam gun, 2.8Spot nozzle, Floor nozzle, Hand nozzle

Models: Zephyr

1 33
Download 33 pages 21.09 Kb
Page 7
Image 7
2.6 Temperature indicator

2. Directions for use

2.6 Temperature indicator

This indicator shows you whether you are working within the proper temperature range (green area).

2.7 Steam gun

The steam can be used without accessories for the following cleaning jobs:

Deodorizing clothing and removing creases from garments;

Dusting houseplants (maintain a distance of approx. 12 in (30 cm));

Damp dusting: apply small amount of steam to surface and then wipe dry with a clean cloth.

2.8Spot nozzle

The spot nozzle can be attached either directly to the steam gun or via the extension tubes.

Because the steam temperature and pressure are at their highest immediately the steam leaves the nozzle, the closer you hold the steam jet to the object to be cleaned, the better the cleaning results will be.

You can use the spot nozzle with its various attachments for cleaning the following

areas that are hard to reach, such as corners, joints, etc.

venetian blinds, radiators

toilets and sanitary installations

stainless steel, windows, mirrors

taps and fittings

coated and enameled surfaces

initial treatment of stains.

Use the nozzle extension to reach otherwise inaccessible cracks and joints, etc.

The power nozzle increases the velocity at which the steam is discharged from the steam gun. This makes it particularly suitable for the following, for example:

removing particularly stubborn dirt

blowing steams into corners, cracks, crevices, etc.

Note:The circular brush is not suitable for cleaning sensitive surfaces.

2.9 Floor nozzle

Depending upon the actual cleaning task, the floor nozzle can be used with the extension tubes. You can use this nozzle for all large washable wall and floor surfaces. Place the floor nozzle onto the folded large cloth, and then pull the cloth under the retaining clips on each side.

The best results for wiping up dirt are achieved when you turn the cloth over, or replace it, frequently.

For more effective cleaning of heavily soiled surfaces, slow down your working speed to allow the steam more time to penetrate the grime.

Any traces of detergents left on the floor surface to be cleaned may form streaks. As a rule these streaks will disappear after the steam cleaner has been applied several times.

2.10 Hand nozzle

Depending upon the actual cleaning task, use the hand nozzle with the extension tubes.

You can use the hand nozzle with the cloth for cleaning:

small washable surfaces

upholstery

sensitive surfaces.

2.11 Optional accessories

Only accessories approved by the manufacturer may be used with this unit.

Household iron (Order no. 6.959-262)

Connect the modular plug on the household iron to the main unit.

Steam-ironing

Rotate the VAPOHYDRO control knob right round to “–”.

For ironing all types of fabrics the temperature control should be set at least to the ... stage. In this setting the steam discharged from the iron prevents the fabric from being overheated.

The higher the selected temperature, the dryer and less visible is the steam; the volume of steam remains the same however.

English 7

Page 7
Image 7
Windsor Zephyr manual Temperature indicator, Steam gun, 2.8Spot nozzle, Floor nozzle, Hand nozzle, Optional accessories