Winegard LP-1000 System Overview, Parts Provided with RoadTrip LP, Installation Safety

Models: LP-1000

1 20
Download 20 pages 30.37 Kb
Page 4
Image 4

1. INTRODUCTION

1.1 System Overview

The Winegard RoadTrip LP is a low profile, in-motion satellite system. RoadTrip LP utilizes GPS (global positioning system) and DVB (digital video broadcasting) technology. GPS is used to determine the present location of your antenna, and DVB is used to verify the antenna has located the correct satellite.

Roadtrip is a Ku-band satellite television reception antenna that is gyro stabilized and has a continuous 360° rotation to keep it locked on the selected satellite. RoadTrip is designed for both open-road tracking and stationary operation.

The RoadTrip system has certain operational limits with respect to use in the United States. Although designed for use with DISH Network and DIRECTV, the system may not work in all geographical locations or with all satellite receivers. See coverage maps, pages 14 and 15.

1.2 Parts Provided with RoadTrip LP

1.Antenna System (includes antenna, LNB, baseplate and control electronics) Fig 1.1

2.Radome

3.Mounting Bracket (4)

4.35 ft. RG-6 coax with weather-protected male F-connector

5.35 ft 2-conduct 16 AWG power wire with weather-protected connector

6.Hardware Kit (See Section 3.5 for contents)

7.Installation/Operation Manual

See page five for diagram of interior and parts

1.3Additional Equipment and Materials Required for Operation of RoadTrip LP

1.Television or Video Monitor

2.Satellite Receiver with authorized programming

3.Approved sealant for roof

Please refer to appendix A for satellite coverage maps and infor- mation on receiver compatability.

2. SAFETY

2.1 Installation Safety:

Winegard highly recommends the RoadTrip LP antenna system be installed by a professional installer who is familiar with satellite antenna technology and recreational vehicle wiring.

Do not attempt to install this system in the rain. Sensitive electronics

may be exposed and water may also enter vehicle. Before drilling any holes for installation, make sure thre are no obstructions, such as wiring, etc.

Read the entire manual before attempting to install the antenna system. Follow the instructions carefully when you begin.

Use all appropriate safety equipment, including eye protection, when installing this system.

Do not attempt to install the antenna system by yourself. Two or more people are required to lift the antenna onto the roof.

Winegard is not liable for damage, expenses, or injury caused by improper installation.

4

Page 4
Image 4
Winegard LP-1000 operation manual System Overview, Parts Provided with RoadTrip LP, Installation Safety