I N S TA L L AT I O N I N S T RU C T I O N S
I N T E G R AT E D DRAWER FRONT
OVERLAY APPLICATION
A minimum 838 mm wide by 610 mm deep cabinet is required for the warming drawer with integrated drawer front using the overlay application. A minimum base support of 91 kg is required. Refer to the illustration on page 10.
INSET APPLICATION
IMPORTANT NOTE: The inset application requires the warming drawer to be recessed into the cabinet. A minimum 635 mm deep cabinet is needed if you want the front panel to be flush with surrounding cabinetry.
If you are installing the warming drawer with integrated drawer front in an inset application, a minimum 838 mm wide and 635 mm deep cabinet is required for this installation. A minimum base support of 91 kg is required. Refer to the illustration below.
UNDERCOUNTER INSTALLATION
For undercounter installations, 597mm from the bottom of the warming drawer opening to the floor is recommended. It must be installed a minimum of 127 mm above the floor or
25 mm above the toe kick.
The Wolf warming drawer with integrated drawer front may be installed below a 762 mm or 914 mm wide electric or gas cooktop, provided the warming drawer is fully enclosed, top and bottom. Refer to installation instruc- tions for the cooktop for additional specifica- tions. Dimensions will vary according to the specific installation.
Integrated Drawer Front – Inset Application
11
