Wolf ICBWWD30 installation instructions N Tac T F O R M At I O N

I N S TA L LAT I ON INSTRUCTIONS

T R O U B L E S H O OT I N G IF YOU NEED S E RV I C E

IMPORTANT NOTE: If the warming drawer does not operate properly, follow these troubleshooting steps:

Verify that power is being supplied to the warming drawer.

Check electrical connections to ensure that the installation has been completed correctly.

Refer to the Troubleshooting Guide in the Wolf Warming Drawer Use & Care Information.

If the warming drawer still does not work, contact your Wolf dealer or regional distrib- utor. Do not attempt to repair the warming drawer yourself.

For service in your area, contact either your Wolf dealer or visit the Locator page of our website, wolfappliance.com to find the regional distributor by country.

When calling for service, you will need the model and serial numbers of the warming drawer. Both numbers are listed on the product rating plate, located on the left front floor area of the inner cabinet. To access the rating plate, the drawer must be fully open. Refer to the illustration on page 5.

C O N TAC T

I N F O R M AT I O N

Website:

wolfappliance.com

The information and images are the copyright property of Wolf Appliance, Inc., an affiliate of Sub-Zero, Inc. Neither this book nor any informa- tion or images contained herein may be copied or used in whole or in part without the express written permission of Wolf Appliance, Inc., an affiliate of Sub-Zero, Inc.

©Wolf Appliance, Inc. all rights reserved.

21