![](/images/new-backgrounds/1063943/6394311x1.webp)
ACCESSORIES
Optional accessories are available through your Wolf dealer.
WOLF WA R M I N G D R AW E R
B E F O R E YOU START
Before you install the warming drawer, make sure you have the Wolf accessory drawer front called for in your installation.
IMPORTANT NOTE: If you are installing the warming drawer with integrated drawer front in an inset panel application, make sure that your cabinetry meets the minimum 838 mm width and 635 mm depth requirement for this installation.
Check with local utilities for electrical codes that apply in your area. Local codes vary. Installation, electrical connections and grounding must comply with applicable codes.
This appliance must be properly grounded. Refer to Electrical Requirements on
page 14.
Make sure you have the tools and materials necessary for proper installation.
D R AW E R F R ON T OPTIONS
IMPORTANT NOTE: Model ICBWWD30 must be installed with a Wolf stainless steel or integrated drawer front.
| Classic Stainless Steel | WWDFRONT/S |
| ||
| Integrated Drawer Front | WWDFRONT/I |
| ||
| (accepts wood panel) |
|
Drawer fronts are ordered and shipped as sales accessories and include additional installation instructions. Stainless steel drawer fronts include a matching tubular handle.
The integrated drawer front accepts a custom wood panel and handle to be provided by the homeowner. Optional stainless steel tubular handles in classic stainless steel are available as sales accessories.
TO O LS AND M AT E R I A LS REQUIRED
Wood screws or other hardware to install the solid platform or runners that support the warming drawer
51 mm x 51 mm or 51 mm x 102 mm lumber for
51 mm x 51 mm or 51 mm x 102 mm lumber for
Power saw
Level
Drill and 1,6 mm bit, 13 mm bit also for integrated drawer front application
Phillips screwdriver
2 wood screws (provided)
Wood cleats for integrated drawer front application
6