Wolfcraft 6157 Assembly, Tools Required, Assemble Stand, Attach Switch Box and Safety Shield

ASSEMBLY

Tools Required

•#2 and #3 Phillips Screwdrivers

•Hammer

•Adjustable Wrench

Assemble Stand

Q, zinc (16)

1.Place tabletop (A) upside-down on a flat surface. Take care not to scratch the tabletop surface.

B-1		B-1
	Q		B-2
Q
			INRAW
		Q	GN
	R		Q C
R

A

Figure 1

2.Attach legs (B-1 and B-2) securely to table top with 16 pan head screws

(Q). Use a #3 Phillips screwdriver to keep from stripping the screw heads.

NOTE: Leg (B-2) is mounted on the front left position of the table top with the safety sticker facing the front. See Figure 1.

Attach Switch Box and Safety Shield

Q, zinc (2)

R, zinc (4)

S (2)

T (4) U (4)

V, black (3)

1.Attach switch box bracket (C) to tabletop with 2 pan head screws (Q).

2.Place table assembly on its side.

3.Use a hammer to tap 4 carriage bolts (R) until seated against the bottom of the tabletop. See Figure 1.

4.Turn table assembly right-side up.

5.Thread a hex nut (T) onto each eyebolt (S) so there is approximately 1/4" of clearance between head of eyebolt and nut. See Figure 2.

S 1/4"

T

Figure 2

9