Install PBY Tube Assembly
1.Remove slug on right side of backhoe console.
2.Remove plug from PBY port on right side of back- hoe valve.
3.Install Power Beyond sleeve (10), straight con- nector (12), and tube assembly (11) on the side of the backhoe valve PBY port. See Figure 16.
4.Attach female quick coupler (2) to third hose (1).
5.Connected to the PBY tube assembly (11).
1.38656 Hose, 112" x 3/8 NPTM x 3/4 ORBM
2.64299 Quick coupler, female 3/8 NPT
10.37409
11.55046 Tube assembly
12.61 Straight connector
Remove Slug 
10
12
11 |
DP3
Figure 16. PBY Tube Assembly Installed
11 | 1 |
| |
12 | 2 |
| |
| Hoses Previously |
10 | Installed |
| |
Backhoe Valve |
|
PBY Port |
|
Backhoe Valve |
|
OUT Port | Backhoe Valve |
| IN Port |
Figure 17. Backhoe PBY Hose Installation
MAN0131 (Rev. 12/23/2005) | Installation 13 |
|
|
