Woods Equipment RBC60 LRC60 Backfilling, Cutting Ditches Blade Only, Parking Stand Placement

Only offset blade when operating in light material such as sand, loose soil, or snow.

CD6156-1

Figure 6. Moldboard Offset Left

Backfilling

Reverse blade for backfilling ditches or trenches (see Reversing).

The rake may also be used in light backfilling applica- tions.

Cutting Ditches (Blade Only)

Angle blade to bring lower end forward. Bring lower point near the center line of the rear wheel track using 3-point hitch height adjustment.

Parking Stand Placement

Operating Position

1.Place parking stand (11) between 3-point mast plates as shown in Figure 7.

2.Secure into position using lock pin (20).

	11	CD6161B
20
11.	Parking stand
20.	1/4 x 2-1/2 Lock pin

Figure 7. Parking Stand - Operating Position

Storage Position

1.Raise tractor 3-point lift arms.

2.Remove parking stand from operating position (Figure 7).

3.Align top holes on parking stand and lowest holes on 3-point mast plates as shown in Figure 8.

4.Secure into position using lock pin (20).

Figure 8. Parking Sand - Storage Position

MAN0169 (Rev. 8/26/2005) Operation 11