SPECIFICATIONS
| RBC60 | LRC60 |
Overall Width | 60 inches | 60 inches |
Weight | 182 lbs. | 177 lbs. |
Moldboard Thickness | ||
Cutting Edge | 1/2" x 6" x 60" Reversible | |
Teeth | 30 - 5/16" x 1" | |
|
| HT High Carbon Tines |
Position | 360° Pivot | 360° Pivot |
Offset - Left or Right | 12 inches | |
Angle - Left or Right | 15° or 30° | 15° or 30° |
Pitch Adjustment | Controlled by top link | Controlled by top link |
Tractor Rating | Max. Engine 25 hp | Max. Engine 25 hp |
Tractor | Cat 0 or 1 | Cat 0 or 1 |
Options | Skid Shoe & Cat 1 | Gauge Wheels & Cat 1 |
| Quick Hitch Bushing Kit | Quick Hitch Bushing Kit |
Quick Hitch | Cat 1 | Cat 1 |
Parking Stand | Included | Included |
GENERAL INFORMATION
The purpose of this manual is to assist you in operating and maintaining your equipment. Read it carefully. It furnishes information and instructions that will help you achieve years of dependable performance.
These instructions have been compiled from extensive field experience and engineering data. Some informa- tion may be general in nature, due to unknown and varying operating conditions. However, through experi- ence and these instructions, you should be able to develop procedures suitable to your particular situa- tion.
The illustrations and data used in this manual were cur- rent at the time of printing. However, due to possible inline production changes, your machine may vary slightly in detail. We reserve the right to redesign and change the machines as may be necessary without notification.
Throughout this manual, references are made to right and left directions. These are determined by standing behind the tractor facing the direction of forward travel.
4Introduction
(Rev 3/9/2010)
MAN0169 (Rev. 5/6/2005)
