Woods Equipment RBC60 LRC60 manual Dealer Check Lists, Pre-Delivery Check List

Models: RBC60 LRC60

1 28
Download 28 pages 53.4 Kb
Page 19
Image 19

DEALER CHECK LISTS

PRE-DELIVERY CHECK LIST

Inspect the equipment thoroughly after assembly to ensure it is set up properly before delivering it to the customer.

The following check lists are a reminder of points to inspect. Check off each item as it is found satisfactory or after proper adjustment is made.

___

Check that all safety decals are installed and in

 

good condition. Replace if damaged.

___

Properly attach implement to tractor and make all

 

necessary adjustments.

___

Check parking stand for proper operation.

___

Check all bolts to be sure they are properly

 

torqued.

___

Check that all cotter pins and safety pins are

 

properly installed. Replace if damaged.

DELIVERY CHECK LIST

___ Show customer how to make adjustments.

___ Instruct customer how to lubricate and explain importance of lubrication.

___ Point out the safety decals. Explain their meaning and the need to keep them in place and in good condition. Emphasize the increased safety haz- ards when instructions are not followed.

___ Present Operator's Manual and request that cus- tomer and all operators read it before operating equipment. Point out the manual safety rules, explain their meanings and emphasize the increased safety hazards that exist when safety rules are not followed.

___ Explain to customer the potential crushing haz- ards of going underneath raised equipment. Instruct customer that service work does not require going underneath unit and never to do so.

___ Show customer the safe, proper procedures to be used when mounting, dismounting, and storing equipment.

___ For mounted units, add wheel weights, ballast in front tires, and/or front tractor weight to enhance front end stability. A minimum 20% of tractor and equipment gross weight must be on front tractor wheels. When adding weight to attain 20% of tractor and equipment weight on front tractor wheels, you must not exceed the ROPS weight certification. Weigh the tractor and equipment. Do not estimate!

___ Make customer aware of optional equipment available so that customer can make proper choices as required.

MAN0169 (Rev. 5/6/2005)

Dealer Check Lists 19

 

 

Page 19
Image 19
Woods Equipment RBC60 LRC60 manual Dealer Check Lists, Pre-Delivery Check List