![](/images/new-backgrounds/1302179/30217949x1.webp)
OPERATIONS
! | Disconnect power to the | |||
machine when perform- | ||||
ing | any | maintenance, | ||
| assembly | or | adjust- | |
| ments. Failure to do this | |||
| may | result in | serious | |
| personal injury. |
|
Keep loose clothing rolled up and out of the way of machinery and keep hair pulled back.
Wear safety glasses dur- ing the entire operations process. Failure to com- ply may result in serious personal injury.
Testing
Once assembly is complete and adjustments have been made, the machine is ready for a test run. The purpose of a test run is to identify any unusual noises and vibrations, as well as to con- firm the machine is performing as intended.
1.Turn the machine on by pulling the START paddle on the power switch. Be sure to have your finger poised to push the paddle in if there is a problem.
2.Once the machine is running, listen for any unusual noises. The machine should run smoothly with little or no vibrations.
3.If there are any unusual noises or vibrations, shut the machine off immediately. The machine should not be run any further until the problems are corrected.
4.Unplug the machine and investigate the source of the noise or vibration. Do not make any adjustments to the machine while it is plugged in.
Always wear a dust mask when operating the W1676. Using this machine produces saw- dust which may cause allergic reactions or respiratory problems.