ASSEMBLY
-13-
The fence assembly consists of the fence, the
fence adjusting bracket, and the fence tilting
handle.
To assemble the fence assembly, do these
steps:
1. Attach the fence to the fence adjusting
bracket with four 8mm flat washers and
four M8-1.25 x 20 cap screws (Figure 11).
2. Slide the fence assembly over the dovetail
way and onto the fence support (Figure
12).
3. Secure the fence assembly to the fence sup-
port by tightening the fence sliding handle.
4. Secure the fence position by threading the
fence tilting handle through the fence
adjusting bracket (Figure 13). Further
adjustment of the fence will be discussed in
the Adjustments section.
Figure 11. Attaching the fence to the fence
adjusting bracket.
Figure 12. Fence assembly on dovetail way.
Figure 13. Securing the fence tilting handle.
Dovetail Way
Fence Tilting
Handle
Fence Assembly