Shop Preparation
ONLY ALLOW TRAINED PEOPLE in your shop! Make sure shop entrances are locked and machines are correctly turned off with
•Lighting: Lighting should be bright enough to eliminate shadows and prevent eye strain.
•Working Clearances: Consider your current and future shop needs with respect to the safe operation of this machine.
•Outlets: Make sure the electrical circuits have the capacity to handle the amperage requirements for your Model W1717. Refer to page 8 for more information. Electrical outlets should be located near the sander, so power or extension cords are clear of
Dust Collection
Some wood dust may cause allergic reactions or respiratory illness. Use a dust collection sys- tem and respirator in your shop to help protect yourself from these long- term hazards.
For information on the correct dust collection components for sanders, contact your Woodstock International dealer for a copy of the Dust Collection Basics handbook and available accessories.
Initial Cleaning
The exposed and unpainted sander surfaces are coated with a waxy oil to prevent rust during storage and shipment. DO NOT use chlorine based solutions or solvents to remove this waxy oil or you will damage the painted surfaces. Remove the waxy oil with a solvent based degreaser before you use the sander. Always fol- low all usage and safety instructions of the prod- uct that you are using.
DO NOT use flammables such as gas or other
DO NOT smoke while using cleaning solvents. Smoking may cause explosion or risk of fire when exposed to these products!
ALWAYS work in a well ventilated area when using solvents with fumes, and keep away from any potential igni- tion sources (pilot lights). Most solvents used to clean machinery are toxic when inhaled or ingested. Always dis- pose of waste rags in a sealed container to make sure they do not cause fire or environmental hazards.
