Woodstock W1811 manual Scoring Blade Elevation, Scoring Controls Lock

N(/((('Jc`[`e^KXYc\JXn

*+% Install the riving knife as shown in =`^li\*-, but do not tighten the mounting bolt yet.

Efk\1N_`c\k_\dflek`e^Yfck`jcffj\#k_\i`m`e^ be`]\ZXeY\X[aljk\[lgfi[fne%

=`^li\*-%Installing riving knife.

*,% Adjust the riving knife approximately 1⁄8" away from the main blade, using a 1⁄8" or 3mm hex wrench as a guide (=`^li\*.), and make sure the top of the riv- ing knife is positioned below the blade's highest point of rotation, as shown in =`^li\,) on GX^\*+.

=`^li\*.% Adjusting the riving knife

spacing.

J<KLG

*-%Use a straightedge to make sure the riving knife and scoring blade are aligned with the main blade.

—The riving knife position can be modified slightly by shimming. Refer to GX^\*, for more details.

—The scoring blade alignment can be changed by adjusting the set screws accessible through the table top (see =`^li\*/or refer to GX^\*.).

Scoring Blade Elevation

Scoring Controls Lock

Scoring Blade

Alignment

=`^li\*/% Access holes for scoring blade

adjustment controls.

-25-