II. Assembly
Assembly of The Rebel® is extremely straight forward and can be accomplished with just a few simple hand tools. In fact, the only tools you will need are a regular screwdriver, Phillips® screwdriver, adjustable wrench,
3⁄16" Allen® wrench and a good quality straight edge. The design of The Rebel® is such that most of the parts are joined together with socket head cap screws. We recommend that you assemble The Rebel® in the order presented here. Use the exploded parts diagram for visual reference during assembly. We suggest that you use a table or work bench that has sufficient surface area to hold all of your tools and the finished Rebel® safely and securely. It is also best to have a well light- ed area to reduce eye strain during assembly.
A. Stand
The stand is made up of four legs, two side pieces and a front piece and back piece. All similar parts are inter- changeable with one another.
Step 1 - Turn the working table up side down and loosely bolt on all four legs using the
5⁄8" socket head cap screws provided.
Step 2 - Mount the short and long side panels between the legs using the
Step 3 - Use a 3⁄16" Allen® wrench to assist in starting and tighten all cap screws down.
Step 4 - Attach the feet to the legs. Figure 3.
Step 5 - Turn the stand assembly over and move on to the next section.
Figure 2. Mounting legs and side panels to the work- ing table.
Figure 3. Attaching the feet to the legs.
6 – W2000 Rebel®
