IDENTIFYING CODES FOUND USING THE SEARCH PROCEDURE
1.Press and hold SETUP until the LED indicator lights steadily. Release Setup button.
2.Press the mode button that matches the equipment you want to identify The LED blinks once.
3.Press and release SETUP. The LED blinks once.
4.To find the first digit, press each number button from 0 to 9 until the LED blinks. The number you pressed is the first digit of the code.
5.Press each number button from 0 to 9 again as above to find the second digit.
6.Press each number button in turn to find the third digit. When the third digit has been found, the LED will go out.
LEARNING
Your UR86A Remote has the codes for most TVs, VCRs, etc. in its code library. However, if the code for your particular device is not found in the library, you can learn these codes from your existing remote. Or if you find a code from the code tables included with this owner’s manual that “almost” matches your device, but a few buttons are missing, you can learn just those buttons.
1.Point your existing remote at the UR86A Remote with a distance of about 1 inch between the remotes.
2.Press and hold SETUP until the LED indicator lights steadily. Release the Setup button.
3.Press the mode button that matches the equipment you want to learn. The LED blinks once.
4.Press and release the LEARN button. The LED blinks once.
5.Press and release the button on the UR86A Remote that you want to teach. (e.g. POWER) The LED blinks once.
6.Press the button on your existing remote that you want to learn. Hold the button until the LED on the UR86A Remote blinks off.
20 | 21 |
