54
INTRODUCTION Congratulations on your purchase of the
X10 MouseRemote and Wireless
Receiver.
Wireless Mouse....
The UR86A remote control works with
the wireless USB receiver (CM19A) or
VGA Video Sender (VT37A). You install
software for it from X10’s Web Site. The
remote control sends wireless RF signals
to the CM19A or VT37A which is
connected to the USB port on your PC.
This lets you use the remote as a wireless
mouse. You use the mouse pad on the
remote to move the cursor around the PC
screen, and use the left and right mouse
buttons just like you would on a regular
mouse. There is also a “Drag” button that
acts like you are clicking and holding the
left mouse button. It’s that simple! The
MouseRemote also lets you configure the
remote’s special function buttons. You
can configure these buttons to perform
special functions such as launching your
WEB Browser, for example.
Universal Remote....
You can use the MouseRemote as a
Universal Remote, to control most audio/
video products. Control your TV, VCR,
Cable Box, Satellite Receiver, etc., all
from the same convenient and easy to use
remote.
Make your lights and appliances go to
work for you....
The X10 MouseRemote controls most or
all of your video and audio equipment.
But what really sets it apart from other
universal remotes is that you can also
control almost any light or appliance in
your home - even in another room! And
it’s easy to install. Within minutes, you
can be using your X10 MouseRemote to
dim the lights, start brewing a fresh pot of
coffee and play your favorite movie!
(Requires X10 Transceiver and Modules,
sold separately).
CONTENTS INTRODUCTION ................................................5
BATTERY INSTALLATION ..................................6
SETTING UP YOUR MOUSEREMOTE.................. 7
BUTTON DESCRIPTIONS........................... 7
BUTTON DEFAULTS................................. 9
MOUSE OPERATION...............................10
SOFTWARE INSTALLATION.......................10
USB RECEIVER INSTALLATION............... 10
MOUSE SOFTWARE CONFIGURATION....... 11
TYPICAL APPLICATION SCENARIO........... 15
SETTING UP FOR TV, VCR, CBL, AUX16
USING AUX TO CONTROL A SECOND
TV, VCR, OR CABLE BOX................... 17
SEARCHING FOR CODES ........................ 18
IDENTIFYING CODES FOUND USING
THE SEARCH PROCEDURE ...................... 20
LEARNING............................................ 21
HOME AUTOMATION.......................................23
CONTROLLERS AND MODULES................ 23
HOUSE CODES AND UNIT CODES ........... 24
INSTALLING HOME AUTOMATION
COMPONENTS....................................... 25
TRANSCEIVER MODULE......................... 25
LAMP MODULE .................................... 26
CONTROLLING X10 MODULES ........................27
CHANGING THE X10 HOUSE CODE:....... 28
CONTROLLING AN IR MINI CONTROLLER 29
EXPANDING YOUR SYSTEM .............................30
TROUBLESHOOTING .......................................32
MOUSE RELATED PROBLEMS ...........33
SYSTEM REQUIREMENTS .................34
WARRANTY ................................................... 35