SETTING UP FOR TV, VCR,
CABLE, CD, AND SATELLITE
RECEIVER
1.Turn on the device you want to control (TV, VCR, cable box, etc.).
2.Press and hold SETUP until the LED indicator lights steadily. Release the SETUP button.
3.Press and release the mode button* that matches the device you want to control. The LED blinks once. Use
AUX for CDs.
4.Enter the 3 digit Code from the Library Code Tables. The LED turns off after the last digit entered.
5.Point the remote at the device and press the POWER button. Your device should turn off.
6.Turn your device on and press CH +. If the device responds, setup is complete.
*You can store any code (TV, VCR, CBL, SAT, CD etc.) under any mode except TV.
USING AUX TO CONTROL A
SECOND TV, VCR, CABLE BOX
OR SATELLITE RECEIVER
The AUX button is normally used to control an audio component such as a CD player, but it can also be configured to control a second TV, VCR, cable box or satellite receiver.
1.Turn on the device you want to control.
2.Press and hold SETUP until the LED indicator lights steadily. Release Setup button.
3.Press the AUX button.
4.Enter the 3 digit Code from the Library Code Tables. The LED turns off after the last digit entered.
5.Point the remote at your A/V component and press the POWER button. Your A/V component should turn off.
6.Turn your A/V component on and press CH +. If it responds, setup is
complete.
16 | 17 |
