Notes:
If your audio/video component does not respond, try the other codes for your brand. If it still doesn’t respond, try the Code Search method below.
If some buttons do not operate your equipment, try one of the other codes for your brand.
If the LED blinks rapidly when you enter the code, you may have entered an invalid code. Recheck the code in the code list and try again.
For CD players use the AUX button. For Laser Disks use the VCR button.
SEARCHING FOR CODES
You can store any type of code under any mode key except TV. e.g. you can store any code (TV, VCR, CBL, SAT, CD etc.) under modes VCR, CBL or AUX.
The procedure below assumes that you want to store VCR codes under the VCR key, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure on page 17 and try ANY CBL code from the code tables, e.g. press CBL in step 3, on page 17, then enter ANY VCR code. Then follow the steps below.
1.Turn on the device you want to control.
2.Press and hold SETUP until the LED indicator lights steadily. Release Setup button.
3.Press the mode button that matches the equipment you want to control. The LED blinks once.
4.Press CH + repeatedly* until the
device to be controlled changes channel.
If you accidentally go past the code, just press CH - repeatedly until the channel changes again.
5.Press and release the ENTER button to
complete the setup.
*Note: You may have to press CH + many times (50+). If the device does not have a Channel Up function, use the PLAY button (VCR only) or the POWER button.
18 | 19 |
