Inverter Drip Shield Installation
The inverter drip shield helps to protect the unit from dripping or splashing liquids, which causes a shock hazard. The inverter drip shield is especially useful in marine installations where water from condensation, rain, or sea may come into contact with the Freedom SW 230V.
SHOCK HAZARD
Do not operate the unit under wet conditions and when the unit is wet. This product is intended only for use in dry areas. Installing the inverter drip shield may not entirely protect you from this hazard.
Failure to follow these instructions can result in death or serious injury.
You may purchase the inverter drip shield by contacting an authorized dealer. When ordering, mention part number
To install the drip shield:
1.Acquire ten
2.Locate an appropriate setting for the drip shield above the Freedom SW 230V making sure you cover the entire width of the unit.
3.Fasten the screws through the holes in the drip shield into the wall.
This guide for use by qualified personnel only.
63 |