Xantrex Technology GT100E owner manual To install the MS100E Interface Assembly Cable

Cable Installation

To install the MS100E Interface Assembly Cable:

1.Connect the MS100E Interface Assembly cable J20 to the GT100E Option Panel P20, located at the bottom/rear of the cabinet, see Figure 2-10.

Option Panel

P20

Figure 2-10GT100E MS Interface Assembly Cable Connection

To install the MS100E Control Power and Interface Cable:

1.Route the MS100E Power Cable assembly P/N 1-152492-01 and MS100E Interface cable assembly P/N 1-152493-01 through the Input/Output Access Base Panel on the GT100E unit. Reference the GT100E Planning and Installation Manual P/N 152364

2.Connect the MS100E Power cable assembly to the MS100E Interface Assembly connector P22, see Figure 2-11.

3.Connect the MS100E Interface cable assembly to the MS100E Interface Assembly connector P21, see Figure 2-11.

4.Connect both of the cable ground wires to the ground terminal using a M5 nut, see Figure 2-11.

152602 2–13