Xantrex Technology GT100E owner manual Important Safety Instructions

Important Safety Instructions

WARNING

This chapter contains important safety and operating instructions. Read and keep this Owner’s Manual for future reference.

1.Before installing and using the GT100E MS Combiner Box for Master/Slave Configuration, read all instructions and cautionary markings on the GT100E MS Combiner Box for Master/Slave Configuration, GT100E Grid Tie Inverter, and all appropriate sections of this manual.

2.Use only attachments recommended or sold by the manufacturer. Doing otherwise may result in a risk of fire, electric shock, or injury to persons.

3.To avoid a risk of fire and electric shock, make sure that existing wiring is in good condition and that wire is not undersized. Do not operate the GT100E MS Combiner Box for Master/Slave Configuration with damaged or substandard wiring.

4.Do not operate the GT100E MS Combiner Box for Master/Slave Configuration if it has received a sharp blow, been dropped, or otherwise damaged in any way. If the GT100E MS Combiner Box for Master/Slave Configuration is damaged, see the Warranty section.

5.Do not disassemble the GT100E MS Combiner Box for Master/Slave Configuration. It contains no user-serviceable parts. See Warranty for instructions on obtaining service. Attempting to service the GT100E MS Combiner Box for Master/Slave Configuration yourself may result in a risk of electrical shock or fire. Internal capacitors remain charged after all power is disconnected.

6.To reduce the risk of electrical shock, disconnect both AC and DC power from the GT100E Grid Tie Inverter and the GT100E MS Combiner Box before attempting any maintenance or cleaning or working on any circuits connected to the GT100E MS Combiner Box for Master/Slave Configuration. Turning off controls will not reduce this risk.

v