Introduction

shutdown. The Master inverter will disable the Slave inverter and close the contactor in the GT100E MS Combiner Box. The Master inverter will go online.

Fault Condition

If the Master or Slave Inverter gets a fault or the status signal from either inverter is lost, the inverters will shutdown and restart as stand alone inverters.

Mis-configuration of Units

If the Master or Slave Inverter are mis-configured by the operator, the inverters run as stand alone inverters.

Figure 1-1Configuration Diagram

1–4

152602

Page 16
Image 16
Xantrex Technology GT100E owner manual Mis-configuration of Units, Fault Condition