The ISC-S Cable

 

The ISC-S Cable

Required accessory

Stacking two identical inverters requires the use of the Inverter Stacking Control –

cable

Series Cable (ISC-S cable). The ISC-S cable is a special cable specifically

 

designed for series-stacking two identical inverters. It consists of one 36-inch

 

stacking control cable with two 25-pin D connectors. It connects to the “Stacking

 

Ports” on the respective inverters and allows the AC output of two (identical)

 

inverters to provide both 120 and 240 Vac, 60 Hz.

CAUTION: Damage to Equipment

Do not use a standard computer cable in place of the ISC-S cable cable. This ISC- S cable is custom made for Xantrex to allow series-stacking with the SW Plus Inverter/charger. Look for the label as shown in Figure 1-3to properly identify the cable.

Use of any other cable may damage your inverters and will not be covered by

Warranty/ Repair.

Xantrex ISC-S Cable

CAUTION: This cable is designed

for series stacking of the SW, SW Plus, or PS inverters only.

Use of any other cable may damage your inverter and void it’s warranty.

Figure 1-3Inverter Stacking Control – Series Cable (ISC-S cable)

975-0059-01-01 Rev A

1–5