Garmin FA168CPS manual Paging Feature, About Automatic Paging

Paging Feature

About Automatic Paging

Your system may be set up to automatically send alert messages to several pagers (up to four for FA168CPS, up to two for FA148CP) as certain conditions occur in your system.

•The following events can be programmed by your installer to be sent to the pagers: arming and disarming†, alarms, and trouble conditions. († reports when arming/disarming from a keypad using a security code; auto-arming/disarming, arming with assigned button, and keyswitch arming do not send pager messages.)

•You can also program the system to send an automatic pager message to alert you in the event that someone has not arrived home (disarmed the system) within a defined period of time (see the Scheduling section for details on programming a “latch key report”).

•Your installer programs the pager phone numbers and reporting events.

•The pager message consists of a 7-digit system status code that indicates the type of condition that has occurred.

•An optional, predefined 16-digit character string can precede the 7-digit system status code; these characters can consist of a PIN no., subscriber account no., or any additional data that you may wish to have sent to the pager.

•The pager display format is as follows:

Optional 16 digits	3-digit Event Code
È	È

AAAAAAAAAAAAAAAA – BBB – CCCC Å 1-digit Partition No. + 3-digit Zone No. or User No.

A =		B =		C =
Optional 16-digits for	A 3-digit code that		A 1-digit Partition number plus a 3-digit Zone or User
Account numbers,	describes the event		number, depending on the type of event that has
PIN numbers, or any	that has occurred		occurred, where:
other data;	in your system		• alarms and troubles display zone number
programmed by the	(see for event		• arming/disarming (opens/closes) display user number
installer, if required.	codes table below)
The 3-digit Event Codes (BBB) that can be displayed are:
911 =		811 =		101 =	102 =
Alarms.		Troubles.		Open	Close
The 4-digit number		The 4-digit number		(system disarmed).	(system armed).
(CCCC) following this		(CCCC) following this		The 4-digit number	The 4-digit number
code is the partition no.		code is the partition no.		(CCCC) that follows	(CCCC) that follows
and zone no. that		and zone no. that		this code is the	this code is the
caused the alarm.		caused the trouble.		partition no. and user	partition no. and user
				no. that disarmed the	no. that armed the
				system.	system.

Ex. 1.

Ex. 2.

9 1 1 – 1 0 0 4

1 0 2 – 2 0 0 5

=Reporting of an alarm (911) caused by a fault on zone 4 on Partition 1 (1004).

=Reporting of a closing–system arming (102)– by user 5 in Partition 2 (2005).

– 28 –