Garmin FA168CPS manual Using the Voice Message Center if Voice Keypad is installed, Stay

System Overview (Continued)

Phone Access

•If included, a Phone Module permits you to access the system via a touch-tone phone, either on-premises or by calling-in when away.

•You can receive synthesized voice messages over the telephone regarding the status of the security system.

•You can arm and disarm the system and perform most function commands remotely via the telephone, with voice confirmation provided after each command.

•Refer to the Phone Access User's Guide supplied with the Phone Module for information regarding the use of this feature.

Paging Feature

•If programmed, the system can automatically send certain system condition messages to up to four (FA168CPS) or two (FA148CP) pagers.

•The system can also automatically alert a pager if the system has not been disarmed by a certain time (e.g., can let you know a child has not arrived home).

•You can also manually send a message to designated pagers.

Using the Voice Message Center (if Voice Keypad is installed)

The Voice Keypads feature a voice message center that lets you record and playback one message.

•The message can be up to 2.5-minutes long

•The message remains in the keypad’s memory until a new message is recorded.

•The volume control of the message is adjustable.

•Refer to the procedures below when using the Message Center functions.

SPEAKER

RECORD KEY

FUNCTION KEYS

	LEDS
		LCD
		DISPLAY
ARMED	READY	MESSAGE

				VOLUME
				KEY
B	4	5 TEST	6BYPASS	PLAY KEY
				AND
A	1INSTANTOFFMAX	2 AWAY	3 STAY	UP VOLUME
	RECORD	VOLUME	PLAY
C	7 READY	8 CODE	9CHIME	VOLUMEDOWN
D		0	#	FUNCTION
	STATUS	VOICE	FUNCTION
	*FA560			KEY
STATUS	MICROPHONE		VOICE
KEY			KEY	FA560VKP-004-V0

Message Center Functions

To…	Press these keys…	Notes…
record a	[#] FUNCTION + [0] VOICE + [1] RECORD	The red MESSAGE LED lights.
message		Message remains in memory
		until a new message is recorded.
end	[1] RECORD	The red MESSAGE LED flashes,
recording		indicating message waiting.
play a	[#] FUNCTION + [0] VOICE + [3] PLAY	The recorded message plays and
message		the red MESSAGE LED turns off.
adjust the	[#] FUNCTION + [0] VOICE + [2] VOLUME keys,	Adjusting message volume also
volume	then press volume key [3] ↑ (up) or [6] ↓ (down)	adjusts status volume. Volume
		cannot be adjusted while playing.

– 7 –