Garmin FA168CPS manual Group Number Partition Start Smtwtfs

Scheduling (continued)

5.For event number “02,” enter the access group

number. Otherwise, this prompt is skipped. Press [∗] to continue to the “Start” prompt below.

6.For event numbers “03-07,” enter the partition number to be armed or disarmed.

0 = arm all; 1 = partition 1; 2 = partition 2; 3 = arm common

Otherwise, this prompt is skipped.

Press [∗] to continue to the “Start” prompt.

7.Enter the event’s start time and days of week. Hour = 00-12; minute = 00-59

AM = 0; PM = 1

Days = Position the cursor under the desired days using the [∗] key to move forward, then press “1” to

select the day. Press [∗] to continue.

8.If applicable, enter the event’s stop time and days of week (applies only to event numbers 01, 02, and 03).

Refer to step 7 for available entries. Press [∗] to continue.

9.Enter the desired repeat option.

0 = no repeat

1 = repeat schedule weekly

2 = repeat schedule biweekly (every other week)

3 = repeat schedule every third week

4 = repeat schedule every fourth week

e.g., To make a schedule that happens everyday you would select all days with a repeat count of 1. To make a schedule that runs for one week then stops,

select everyday with a repeat count of 0. Press [∗] to continue.

10.For event number 01 (output on/off), select the desired randomize option. 0 = no; 1 = yes

If selected, the schedule times will vary within 60 minutes of the “hour” time. For example, if a schedule is set to start at 6:15pm, it will do so the first time 6:15pm arrives, but on subsequent days it

will start anytime between 6:00 and 6:59 p.m. Press [∗] to continue.

GROUP NUMBER

X

PARTITION

X

START SMTWTFS

HH:MMAM 1000000

STOP SMTWTFS HH:MMAM 1000000

REPEAT OPTION

0-4X

RANDOMIZE

0=NO 1=YES X

– 36 –