Garmin FA168CPS manual Accessing Other Partitions Continued, Using the GoTo Command

Accessing Other Partitions (Continued)

Using the GoTo Command

If the user is authorized, a keypad in one partition can be used to perform system functions in the other partition by using the GOTO command.

•You must use an Alpha keypad to access another partition.

•Keypads automatically return to their original partition after 30 seconds with no keypad activity.

1. + [∗] + partition number (0,1,2,3)

(Security Code; only applies if user has access to other partitions)

0 = return to keypad’s original partition.

1 = partition 1; 2 = partition 2; 3 = common zone The keypad beeps to confirm the partition change.

2.The keypad remains in the new partition until directed to go to another partition, or until it automatically returns to the original partition.

The active partition number is displayed in the upper left portion of screen, if the option is programmed.

Alpha Display:

1DISARMED READY TO ARM

Fixed-Word Display: Green LED lit

Alpha Display:

2DISARMED READY TO ARM

Fixed-Word Display: Green LED lit

Multi-Partition Arming

Some users can be given Multi-Partition arming ability by being assigned to both partitions when programming user attributes.

When attempting to arm multi-partitions:

•You must use an Alpha keypad.

•The system arms only if all partitions are “ready to arm.”

•If any partition is “not ready,” the system does not arm at all.

•You can use the GOTO command to bypass open zones before arming.

•If any partition is already armed when global arming is attempted, that partition remains in its existing armed state.

+ [0] + arm command (see list below)

(Security Code)

Multi-Partition Arming Commands

2 = arms all partitions AWAY

3 = arms all partitions STAY

33= arms all partitions NIGHT-STAY

4= arms all partitions MAXIMUM

7= arms all partitions INSTANT

1= disarms all partitions

Alpha Display:

1DISARMED READY TO ARM

Fixed-Word Display: Green LED lit

– 33 –