Trouble Conditions (Continued)

 

Other Trouble

AC LOSS

The system is operating on battery power

Displays

(or NO AC)

only due to an AC power failure.

(Continued)

 

 

If only some lights are out on the premises,

 

 

 

 

check circuit breakers and fuses and

 

 

reset or replace as necessary.

 

 

If AC power cannot be restored and a

 

 

“low system battery” message appears

 

 

(see previous page), CALL FOR

 

 

SERVICE.

 

 

 

 

 

Busy-Standby

If this message remains displayed for more

 

(or dI)

than 1 minute, system is disabled. CALL

 

 

FOR SERVICE.

 

 

 

 

 

OPEN CIRCUIT

The keypad is not receiving signals from

 

(or OC)

the control. CALL FOR SERVICE.

 

 

 

 

 

Long Rng Trbl

If part of your system, back-up Long

 

(or bF)

Range Radio communication has failed.

 

 

CALL FOR SERVICE.

 

 

 

 

 

TELCO FAULT

The telephone line has a problem.

 

(or CHECK 94)

CALL FOR SERVICE.

 

 

 

 

 

Total Power Failure If there is no keypad display at all, and the READY indicator is not lit, operating power (from AC and back-up battery) for the

system has stopped and the system is inoperative. CALL FOR

SERVICE.

In The Event Of Telephone Operational Problems

In the event of telephone operational problems, disconnect the control from the phone line by removing the plug from the phone wall jack. We recommend that your installer demonstrate this disconnection on installation of the system. Do not attempt to disconnect the phone connection inside the control. Doing so will result in the loss of your phone lines. If the regular phones work correctly after the control has been disconnected from the phone wall jack, the control has a problem and you should immediately call for service. If upon disconnection of the control, there is still a problem on the phone line, notify the Telephone Company that they have a problem and request prompt phone repair service. The user may not under any circumstances attempt any service or repairs to the security system. Repairs must be made only by authorized service (see the LIMITED WARRANTY statement for information on how to obtain service).

– 41 –

Page 40 Page 42
Page 41
Image 41
Garmin FA168CPS manual Busy-Standby, Long Rng Trbl
Page 40 Page 42

FA168CPS specifications

The Garmin FA168CPS is an advanced navigation device designed primarily for marine use, offering a multitude of features tailored to enhance the user experience on the water. One of its standout characteristics is its high-resolution, sunlight-readable display, which ensures optimal visibility even in bright conditions. The screen is designed to provide clear, detailed maps and graphical data, making navigation easier and more efficient for boaters and sailors alike.

Equipped with GPS and GLONASS technology, the FA168CPS delivers rapid and precise positioning capabilities. This dual-satellite system enhances reliability and coverage, particularly in challenging maritime environments. The device also incorporates a built-in Fishfinder, allowing anglers to locate fish with ease. With advanced sonar capabilities, including CHIRP technology, users can distinguish between different types of fish and underwater structures, significantly increasing their chances of successful fishing trips.

One of the key features of the Garmin FA168CPS is its compatibility with various marine networks. It supports NMEA 2000 for seamless connectivity with other marine devices, allowing users to integrate their navigation system with autopilots, engines, and sensors for streamlined operation. This interoperability enhances situational awareness and greatly improves safety on the water.

Additionally, the FA168CPS comes with preloaded maps and charts, offering comprehensive coverage for coastal and inland waters. The device can also be upgraded with additional Garmin BlueChart g3 maps, providing users with the most up-to-date navigational data, including buoy locations, tidal information, and depth contours.

Among its user-friendly characteristics, the Garmin FA168CPS features intuitive menus and customizable screen layouts, allowing users to personalize their navigation experience. Its robust construction ensures durability in marine environments, making it resistant to water and other harsh conditions. The device is also designed for easy installation, ensuring that boaters can set it up quickly and get right to their adventures.

In summary, the Garmin FA168CPS combines cutting-edge technology with practical features to provide a comprehensive marine navigation solution. From its excellent display and advanced sonar capabilities to its compatibility with marine networks and customizable user interface, this device is an essential tool for anyone looking to navigate the waters with confidence and precision.
Top Page Image Contents