Installation
Connecting the ISC-S Cable
The ISC-S Cable connects to the Stacking Port on the AC end of the Sine Wave Plus Inverter/charger. The Stacking Port is a 25-pin receptacle for the 25-pin D-connector on the ISC-S Cable. Once the connector is in place, it is secured by two screws on the sides of the connector.
| Align the head of the connector | Gently tighten these two screws to |
| with the Stacking Port on the |
| secure in place. |
| inverter and insert into the port. |
| |
Figure 2-8The 25-pin D-connector on the ISC-S Cable
Stacking Port
Figure 2-9Stacking Port Locations on SW Plus Inverters
To connect the ISC-S cable:
1.Orient the 25-pin D-connector to align with the Stacking Port on the Inverter and gently press the connector into the port. Use caution not to bend the pins inside the connector head.
2.Tighten the screws on the connector to secure the cable to the port.
3.Connect the other end of the ISC-S cable to the second inverter’s Stacking Port as instructed in step 1 and 2.